Sulphur, OK-2016 Paoli-Rosedale

Custom Calling Features

To Set Up Speed Calling 30: 1. Write down the name and the phone num- ber of each person that you want to set up for speed calling. Choose a separate Speed Calling code (from 20 to 49) for each phone number. Customers without touch-tone service should dial 75 and wait four seconds. 3. Wait for the dial tone and dial a Speed Calling code (from 20 to 49). 4. Now, dial the phone number for that Speed Calling Code (including a “1” and the area code if it’s a long distance number.) Several short tones will confirm your entry. 5. Hang up, then repeat steps 2-4 for each new number. 2. Dial 75#

Speed Calling (8 or 30) How It Works:

Speed Calling lets you dial frequently called numbers with one or two digits. It provides quick calling at your fingertips. To Set Up Speed Calling 8: 1. Write down the name and the phone number of each person that you want to set up for speed calling. Choose a sepa- rate Speed Calling code (from 2 to 9) for each phone number. 2. Dial 74# Customers without touch-tone service should dial 74 and wait four seconds. 3. Wait for the dial tone and dial a Speed Calling code (from 2 to 9). 4. Now, dial the phone number for the Speed Calling code (including a “1” and the area code if it’s a long distance number). Several short tones will confirm your entry. 5. Hang up, then repeat steps 2-4 for each new number. Note: The numbers 1 and 0 are not Speed Calling codes because 1 is used to place long distance calls and 0 is used for reaching the Operator. Tip: Jot down the complete numbers associated with your Speed Calling codes. This is helpful when you’re away from home and need to place calls to these numbers.

To Use Speed Calling: 1. Simply dial the Speed Calling Code. Customers without Touch-tone service should dial the Speed Calling code and wait four seconds. Note: If you have a touch-tone telephone, you can press the # button to eliminate the usual four sec- ond pause after dialing your Speed Calling code. Note: To reprogram a Speed Calling code, follow steps 1-4 for each code changed.

13